Best U Haul Trailer Hitch Lock 2021
Below is the top 10 best u haul trailer hitch lock review to guide you buy the best product. Choose one of these products and your satisfaction is guaranteed!
In Hurry? Checkout Our Top Pick Of Best U Haul Trailer Hitch Lock.
Our Top Pick
9.7/10 our score
Best U Haul Trailer Hitch Lock
| Rank | Product Name | Score |
|---|---|---|
1  | Softride Quiet Ride Locking Tightening Hitch Pin; Anti-Rattle for Receiver Hitches, Bike Racks, or Boat Trailers; Silence the “clanking” noise that occurs while towing (25219) | 9. 7 |
2  | LIBERRWAY Hitch Tightener for 1.25″ and 2″ Hitches 304 Stainless Steel Hitch Tightener Anti-Rattle Stabilizer Rust-Free Heavy Duty Lock Down Easy Installation Quiet | 9. 5 |
3  | Tulga Fifth Wheel Co 2 Packs Anti Rattle Hitch Tightener Stabilizer No Sway for 2″ and 1.25″ Steel Heavy Duty Rust Free | 9. 1 |
4  | Hitch Tightener for 1.25″ and 2″ Trailer Hitches Stainless Steel Hitch Tightener Anti Rattle Hitch Stabilizer U Clamps 2 Inch Hitch Stabilizer Rust-Free Heavy Duty Lock Down Easy Installation | 8. 8 |
5  | CZC AUTO Hitch Tightener, Heavy Duty Anti-Rattle Stabilizer for 1.25″ and 2″ Hitches, Reduce Movement from Hitch Tray Cargo Carrier Bike Rack Trailer Ball Mount, Rust Free (1 Pack, Carbon Steel) | 8. 6 |
6  | Bravex Trailer Hitch Lock 5/8″ Chrome Hitch Pin for Class III, IV, V Hitches (3-1/2″ Spans) | 8. 2 |
7  | Elemake Trailer Hitch Lock – Hitch Pin Lock 5/8″ Pin Tow Receiver Lock, Heavy Duty Brass Core Locking Mechanism, 3-1/2″ Usable Length Fits Class III, IV, V Hitches | 8. 0 |
8  | Rhino USA Hitch Tightener Anti-Rattle Clamp – Heavy Duty Steel Stabilizer for 1.25 and 2 inch Hitches – Protective Anti-Rust Coating Included on All Rhino Products. | 7 .7 |
9  | CZC AUTO Hitch Tightener 304 Stainless Steel Heavy Duty Anti-Rattle Stabilizer for1.25 2 Inch Hitch, Rust-Free Lock Down Hitch Stabilizer for Hitch Tray Cargo Carrier Bike Rack Trailer Ball Mount | 7. 4 |
10  | CZC AUTO Hitch Tightener Heavy Duty Anti-Rattle Stabilizer for1.25 2 Inch Hitch, Rubber Coated Lock Down Hitch Stabilizer Set with a Wrench for Hitch Tray Cargo Carrier Bike Rack Trailer Ball Mount | 7. 2 |
1. Softride Quiet Ride Locking Tightening Hitch Pin; Anti-Rattle for Receiver Hitches, Bike Racks, or Boat Trailers; Silence the “clanking” noise that occurs while towing (25219)
9.7/10 our score
- Compatible with hitch receivers, hollow shank ball mounts, and multiple brands of hitch mounted bike racks, including Thule, Yakima, Saris, Kuat, Rocky Mounts, Swagman, Hollywood, Allen, and Inno. and hitches from manufacturers including Curt, Reese, Draw-Tite, Hidden Hitch, TorkLift, and Ultra-Fab
- Eliminate the annoying rattle and vibration when towing by using this versatile anti rattle anti theft accessory, compatible across brands. Anti rattle hitch tightener reduces wobble, stops movement, play, and sway, eliminates the clank noise. Halts up and down and side to side motion, prevent drawbar rattling and wobbling under load.The adapter can be rotated 180° for variances in wall thickness of the ball mount or receiver mounted equipment
- Perfect for use with a car, van, truck, RV, tow vehicle, SUV, ATV, bicycle rack, camper, fifth wheel, boat trailers, cargo trailer, gooseneck and towing accessories. Extra long pin compatible with Toyota hitches. Reduces wear on drive train when stopping and starting. Anti-theft hitch lock included for security.
- Kit includes: heavy duty solid stainless steel threaded hitch pin, lock washer, nut, rugged nut holder and fit adjuster, durable brass lock and keys, rubber dust cover for extra protection against dirt, debris, and weather. Friendly customer service from a small family-run company in the USA.
- Easy installation – hand tighten the pin, THEN attach lock, THEN wrench tighten. Install with hitch classes 1, 2, 3, and 4 (i. ii. Iii. Iv), on 2” receiver (not on 1.25” receivers). Patented 2-axis tightening. An insert fitted with a nut slides inside a hollow ball mount to pull it tightly against the receiver tube. Fix to keep tow trailer secure, quiet, snug and tight.
- NOTE: Please refer to the user manual before use
2. LIBERRWAY Hitch Tightener for 1.25″ and 2″ Hitches 304 Stainless Steel Hitch Tightener Anti-Rattle Stabilizer Rust-Free Heavy Duty Lock Down Easy Installation Quiet
9.5/10 our score
- Anti-rattle hitch tightener was designed to completely eliminate hitch noise, wobble, rattle and hitch movement for cargo carriers, hitch receiver, trailer ball mounts, bike racks, hitch racks, etc. Enjoy your quiet towing experience.
- Great ideal for hitchs on trucks, suv’s, vans, RV’s and trailers. Easily installs with Class I, II, III or IV (1, 2, 3 or 4) hitches that measure either 1.25″ and 2″ (will not work on 2.5″ or larger hitch)
- Package includes a heavy duty 304 stainless steel U-bolt and thick powder coated plate will never rust, spring lock washers and flat washers help to tightening it in place and secure. Follow the picture to install it and also can be mounted from the bottom
- LIFETIME WARRANTY – quality guarantee from LIBERRWAY. We have UPDATED the nuts and fixed the nuts seized issue, contact us if you have any question or issue.
3. Tulga Fifth Wheel Co 2 Packs Anti Rattle Hitch Tightener Stabilizer No Sway for 2″ and 1.25″ Steel Heavy Duty Rust Free
9.1/10 our score
- Compatibility Hitch tightener can be used with 2″ and 1.25″ tow hitch receivers，including Curt, Rola, Yakima, Inno, Draw-Tite, Blue Ox, Hidden Hitch, Thule, Tulga, U-Haul and other brands. It is compatible with all hitch classes includes I, II, III, and IV (1, 2, 3 and 4), both 2” and 1.25” models, ideal for hitches on SUV’s, vans, trucks, RV’s, sedans and trailers.
- Material Includes a heavy-duty stainless steel U-bolt and thick powder coated plate that will last to all weather conditions and loads.
- Easy Installation Convenient and easy to install! Simply slip the U-bolt over the receiver, slide the tightener plate into the bolt, and tighten into place. In just 3 easy steps and in less than 10 minutes.
- Safety prevents from rattling, wobbling, rocking and hitch movement for cargo carriers, hitch racks, bike racks and trailer ball mount. Leading design of Tulga hitch tightener is the best anti rattle hitch tightener in the market.
- Warranty Our heavy duty built hitch tightener is backed with 30 days money back guarantee and LIFETIME WARRANTY
4. Hitch Tightener for 1.25″ and 2″ Trailer Hitches Stainless Steel Hitch Tightener Anti Rattle Hitch Stabilizer U Clamps 2 Inch Hitch Stabilizer Rust-Free Heavy Duty Lock Down Easy Installation
8.8/10 our score
- Bumping and clanking between your hitch receiver and hitch-mounted accessory can be very normal, but it’s also avoidable. By adding our hitch tightener to your setup, you can prevent the ball mount or hitch-mounted accessory from jerking and rattling in the receiver
- Great for tow bars, high-low adapters, cargo carriers, racks of motorcycle bike dirt bike wheelchair and more. Compatible with Class I, II, III or IV (1, 2, 3 or 4) hitches that measure 2″
- This hitch stabilizer is made of heavy duty galvanized steel with protective powder coat finish for anti-rust performance
- Compatible with a variety of tow/carry vehicles – truck, SUV, RV, sedan, van, minivan camper, etc, works with many hitches, ball mounts and racks from many companies, like Reese, Thule, Draw Tite, Rhode Gear, Saris, etc.
- Easy to install: Simply slide the U-bolt over your hitch bar, adjust the plate, and tighten the screws
5. CZC AUTO Hitch Tightener, Heavy Duty Anti-Rattle Stabilizer for 1.25″ and 2″ Hitches, Reduce Movement from Hitch Tray Cargo Carrier Bike Rack Trailer Ball Mount, Rust Free (1 Pack, Carbon Steel)
8.6/10 our score
- Our hitch tightener equiped with heavy duty φ0.4″ U-bolt and 0.28″ thick black powder coated plate anti-rattle stabilizer, can undertake all weather condition, rust free.
- Reduce rattle and movement for hitch tray, cargo carrier, bike rack, trailer ball mount with brands curt,highland, goplus, pro series, rola, yakima, thule, etc. Can help to decrease noise and give you a quiet world when towing.
- This tow clamp is perfect for locking 1.25″ and 2″ hitches, compatible with most hitches classes I, II, III, and IV (1, 2, 3 and 4). Suitable for trailer truck SUV sedan RV camper van and minivan.
- Easy to install, after insert the tube, lock them directly by U-bolt and plate, put on original spring washers, flat washers and fasten by nuts, then done. If the hitch is low, and there is a risk for U-Bolt to scrap ground, lock the tightener from the bottom.
- New arrival with very good price for only 1 month. Do not miss this price in hesitation. Please feel free to contact us at first if there is any problem when you receive or use our products. We are always here to support you.
6. Bravex Trailer Hitch Lock 5/8″ Chrome Hitch Pin for Class III, IV, V Hitches (3-1/2″ Spans)
8.2/10 our score
- High Quality: 100% pure brass core, chrome-plated hardened steel, high quality tubular key, make this product durable.
- All-round Protection: 5/8” Hitch Pin, MAX OUTER HITCH WIDTH of 3-1/2″,total length 7”.
- Unique Design: 1/4 Turn lock and push lock design, so that it can be quickly installed and removed.
- Easy to use: Single key lock design makes it simple to unlock and lock, perfect hitch accessory.
- Wide Compatibility: Fit in all standard Class III , IV , V hitches.
7. Elemake Trailer Hitch Lock – Hitch Pin Lock 5/8″ Pin Tow Receiver Lock, Heavy Duty Brass Core Locking Mechanism, 3-1/2″ Usable Length Fits Class III, IV, V Hitches
8/10 our score
- HEAVY DUTY CONSTRUCTION — Strong hardened steel structure, chrome plating, not easy to bend
- FITS CLASS III, IV, V 2″, 2-1/2″ HITCHES RECEIVER. TOW UP TO 20,000 LBS — 5/8″ hitch pin hole allowing it to lock up your shackle hitch or multi ball receiver! 3-1/2″ Spans
- BRASS CORE LOCKING MECHANISM — Over 15 years of service life,super anti-corrosion.Single key lock design makes it simple to unlock and lock, perfect hitch accessory!
- ALL-WEATHER PROTECTION — Chromed steel for improved wear and corrosion resistance,weatherproof rubber key slot cap. Designed to protect your bike racks, trailers, cargo hitch racks, and boats!
- 2 YEARS WARRANTY AND 100% SATISFIED SERVICE — If you are not satisfied with the product, please contact us to refund or replace the product
8. Rhino USA Hitch Tightener Anti-Rattle Clamp – Heavy Duty Steel Stabilizer for 1.25 and 2 inch Hitches – Protective Anti-Rust Coating Included on All Rhino Products.
7.7/10 our score
- ▶ SUPPORT A SMALL FAMILY CO. – Buy From a Father/Son Business in California & Receive a Lifetime Warranty!
- ▶ ANTI-RATTLE CLAMP – Solid Forged Steel Ensures Elimination of Wobble, Rattle & Noise
- ▶ FITS COMMON HITCHES – Our Unique Stabilizer fits all Class I, II, III & IV Hitches With Ease.
- ▶ CONFIDENCE & PEACE OF MIND – Knowing Your Load is Stable & Locked Down by the Best There is!
- ▶ GUARANTEED 5-STAR EXPERIENCE – If you aren’t 100% Satisfied for any Reason, We’ll Refund Your Money
9. CZC AUTO Hitch Tightener 304 Stainless Steel Heavy Duty Anti-Rattle Stabilizer for1.25 2 Inch Hitch, Rust-Free Lock Down Hitch Stabilizer for Hitch Tray Cargo Carrier Bike Rack Trailer Ball Mount
7.4/10 our score
- Firm and Solid with a Long Lifespan. CZC AUTO stainless trailer hitch tightener equiped with STAINLESS STEEL φ0.4 inch U-bolt, flat wahsers, spring washers, nuts and CARBON STEEL 0.28 inch thick black powder coated plate. The heavy duty rustfree stainless anti rattle stabilizer can undertake all weather condition and serve for a long time. Please Note: the plate is NOT stainless steel.
- Vital Specifications. The tow clamp is perfect for locking 1-1/4 inch and 2 inch hitches Only ( If you need bigger one, please find: B07Z36ZXBT). This stainless hitch clamp is compatible with most hitch brands reese towpower, maxxhaul, connor and hitches classes I, II, III, and IV (1, 2, 3 and 4). It’s suitable for trailer truck SUV sedan RV camper van and minivan.
- Superior Performance in Universal Application. Reduce rattle and movement for hitch tray, cargo carrier, bike rack, trailer ball mount with brands curt,highland, goplus, pro series, rola, yakima, thule, etc, this stainless lock down hitch stabilizer helps to decrease noise and give you a quiet world when towing.
- Easy to Install. After inserting the tube, lock them directly by U-bolt and plate, put on original spring washers, flat washers and fasten by nuts, then done. If the hitch is low, there is a risk for U-Bolt to scrap ground, lock the stainless hitch tightener from the bottom.
- CZC AUTO – Reliable Brand in Hitch Tightener Industry. We offer 30-day money-back for any reason, 12-month warranty for quality-related issues. If you have any issue in using our tow hitch tightener, please feel free to contact us, your problem will be solved within 24 HOURS.
10. CZC AUTO Hitch Tightener Heavy Duty Anti-Rattle Stabilizer for1.25 2 Inch Hitch, Rubber Coated Lock Down Hitch Stabilizer Set with a Wrench for Hitch Tray Cargo Carrier Bike Rack Trailer Ball Mount
7.2/10 our score
- Firm and Solid with a Long Lifespan. CZC AUTO rubber coated trailer hitch tightener equiped with φ0.4 inch U-bolt that coated with orange rubber for a better silence feature, Zinc plated flat wahsers, spring washers, nuts and 0.28 inch thick black powder coated plate are anti corrosion. The heavy duty rustfree anti rattle stabilizer can undertake all weather condition and serve for a long time.
- Vital Specifications. The tow clamp is perfect for locking 1-1/4 inch and 2 inch hitches Only ( If you need bigger one, please find: B07Z36ZXBT). This hitch clamp is compatible with most hitch brands reese towpower, maxxhaul, connor and hitches classes I, II, III, and IV (1, 2, 3 and 4). It’s suitable for trailer truck SUV sedan RV camper van and minivan.
- Superior Performance in Universal Application. Reduce rattle and movement for hitch tray, cargo carrier, bike rack, trailer ball mount with brands curt,highland, goplus, pro series, rola, yakima, thule, etc, this lock down hitch stabilizer helps to decrease noise and give you a quiet world when towing.
- Easy to Install. After inserting the tube, lock them directly by U-bolt and plate, put on original spring washers, flat washers and fasten by nuts, then done. If the hitch is low, there is a risk for U-Bolt to scrap ground, lock the hitch tightener from the bottom.
- CZC AUTO – Reliable Brand in Hitch Tightener Industry. We offer 30-day money-back for any reason, 12-month warranty for quality-related issues. If you have any issue in using our tow hitch tightener, please feel free to contact us, your problem will be solved within 24 HOURS.
