Uncover the Mysteries: Why is My Shark Vacuum Making a Loud Suction Noise?
Well, this article here will answer this question. Whether it’s because of a Shark vacuum high pitch noise when you clean or you have a Shark vacuum making loud air noises, this will help you figure out why.
Now, without further adieu, let’s start diagnosing your Shark unit.
Why is My Shark Vacuum So Loud?
If you have a Shark rocket making loud noise or irregular suction sounds, you may think it’s cause for concern. However, this doesn’t mean that your vacuum isn’t working as it should—just that something needs a minor fix and will be working perfectly in a jiffy.
Here are a few reasons why you’re Shark vacuum sounds funny:
The Hose is Clogged:
If your Shark vacuum sounds clogged, it may be because something is blocking the hose. Things like hairballs, a stray sock, a giant dust bunny, or even a coin can clog the hose, creating a whistling noise.
The remedy is simple; disassemble the hose from the head and the rest of the unit and get rid of the blockage. Then, give the hose a good cleaning and let it dry before putting your Shark vacuum back together.
This will give you a better idea of what to do if this is the issue with your Shark.
The Roller Brushes are Tangled:
To identify the cause of a strange, rattling noise, check the roller or beater brushes. If your Shark Navigator Lift-Away is making a strange clicking noise, it may be an issue with the brush rolls.
Many vacuums allow you to turn off these brushes, solving the issue temporarily. For a more lasting solution, you can remove the brushes from the vacuum and remove whatever is stuck in them.
The Roller Brush Belt Has Slipped Off:
In many vacuum cleaners, especially canisters, you might have faced the problem of the belt popping off, creating rustling, crackling noises. If this is the case, slipping it back on or replacing the belt will solve the problem.
Bear in mind that this may happen only if you’ve been using your vacuum for a while. If you recently brought your Shark vacuum, this is most likely not the case.
The Filter Has Broken:
Strange noises from your vacuum can also be an indication that your filter has broken or is extremely clogged and dirty. Check the filter, and if it is broken or filthy, replace it with a new one. This will also allow your vacuum to better clean your house.
The Fan is Damaged:
Strange suction noises from your Shark vacuum cleaner can be the result of a broken fan. The fan plays a vital role in your vacuum cleaner, preventing the unit from overheating. After frequent use, dirt will pass through your Shark vacuum cleaner’s motor and accumulate on the fan.
This can sometimes cause the fan to break, causing the vacuum cleaner to create a louder noise. If this happens, it’s best to take it to get professionally repaired.
The Motor is Damaged:
If none of the issues mentioned above seem to be the problem, there’s a good chance that the motor itself is the problem. This is especially likely for older vacuums that have seen heavy-duty use. Like a broken fan, this problem needs professional help.
Frequently Asked Questions
Below you’ll find answers to questions often asked about Shark vacuums making weird noises.
01. What Can I Do if My Shark Navigator HEPA Filter Pops Off?
This can happen for two reasons main reasons that are easily remedied:
- One of the hooks holding the filter in place is broken and needs to be replaced. Or you can find another way to keep the HEPA filter secure in its position.
- Another reason may be that your HEPA filter has a broken seal. If this is the case, you need to replace the filter with a new one.
02. How Can I Go About Shark Ion Robot Troubleshooting Loud Noise?
If your Shark Robot vacuum is making weird noises, then it may be because something is stuck to the beater brushes. Also, sometimes something solid can get stuck in the dustbin and rattle around, so emptying the dustbin is a good idea.
03. Why is My Shark Steam Mop Making Clicking Noise?
This is a sign that there are mineral deposits in your steam mop from using hard water. To correct the matter, use equal parts vinegar and water to clean out the deposits. Do this outside, and run a cycle the way you would a coffee maker.
To prevent this, use distilled water in your steam mop.
04. Why is My Shark Ion Robot Brush Making Noise?
A grinding noise from your robot vacuum is a sign that the plastic gears in the device have worn away. As a result, they make strange noises when switched on. Unfortunately, the only option, in this case, is to get a new vacuum.
Now you have all the possible answers to the question: why is my Shark vacuum making a loud suction noise? There can be a plethora of causes so take the time to examine your unit carefully to try and identify the cause.
And of course, when in doubt, call the manufacturer for help and see your vacuum needs professional repairs or an overall replacement.